The circumference configuration on the external devices must be:
Real circumference / ( subdivided per ) 12.1.
Example:
- Wheel circumference = 2095 mm, so 2095 / 12.1 = 173,14
- Must be set as 173 mm on the device
The circumference configuration on the external devices must be:
Real circumference / ( subdivided per ) 12.1.
Example:
- Wheel circumference = 2095 mm, so 2095 / 12.1 = 173,14
- Must be set as 173 mm on the device
Why do you need to set the wheel circumference when the rear wheel is removed on the Direto? It seems that the wheel circumference should not be needed?
The speed sensor is not on the big pulley, and there is a multiplication between the big pulley and the little hub where the speed is read.
Please set the circumference like this and it will work fine.