Here below the instructions to correctly replace both the belt and black pulley.
Please note the following things:
- Please don’t bend or crimp the new belt during the substitution.
- Once the belt has been replaced it is mandatory to correctly tighten it.
CAUTION: The use of an electric screwdriver to tighten the locking screw may damage the product (max torque 2 Nm).
Click on the link below for the French version of the video: https://youtu.be/bcz6uc9i-xo
Once the belt has been replaced, proceed with the calibration procedure:
1) Launch My E-Training and go to: Parameters/Configuration/Trainer calibration;
2) Start pedaling.
3) The resulting number should be considered as your new offset number.
Write down your new offset number for future calibration operations. It is necessary to note down the new offset number for possible future calibrations. The new value replaces the old offset value indicated on the silver label underneath the home trainer, we recommend applying a new sticker with the new number obtained.