The video below shows the procedure for connecting the Avanti, Justo 2 and Rivo trainers to a Wi-Fi network and how to correctly set up your smart trainer for the first time:
French version of the video available here: https://youtu.be/eZ9BVTkT36Y
Español: https://youtu.be/3cjo4hJEplQ
Deutsch: https://youtu.be/gxDnwhsCWfk
Nederlands: https://youtu.be/yrWa8TcyE_0
The Avanti, Justo 2 and Rivo trainers support 2.4 GHz Wi-Fi networks and, once configured, will automatically reconnect to the selected network.
When using the trainer in Wi-Fi mode, firmware updates are automatically performed at startup, in the background.
Wi-Fi connectivity offers increased stability and responsiveness during indoor training, improving the trainer’s performance and enabling full use of all its features.
To configure the wireless connection:
Pair the trainer with the My E-Training app.
Go to the menu Settings > Wi-Fi.
-
Select the desired Wi-Fi network and enter the credentials.
Make sure the Wi-Fi network name contains only Latin characters and numbers.
If the network password exceeds 32 characters, replace it with a shorter one to ensure a successful connection.
Once the procedure is complete, the app will confirm that the connection was successful.
Automatic firmware update via Wi-Fi network
When connected to a Wi-Fi network, Avanti, Justo 2 and Rivo trainers can automatically download and install any available firmware updates. The update process consists of two distinct phases:
1. Firmware package download
The trainer checks for new firmware updates every 4 power cycles.
If an update is available, the download will start automatically.
During this phase, the white LED will blink rapidly.
The trainer can still be used normally while the download is in progress.
2. Firmware installation
At the next startup, the trainer will automatically install the downloaded firmware.
During this phase, the blue LED will blink rapidly.
The trainer is not available for use during installation.
It is recommended not to unplug the trainer from the power supply until the update is complete.
Once the process is complete, the trainer will be updated to the latest firmware version available.
Note:
A "power cycle" is defined as:
• unplugging the trainer from the power source and plugging it back in, or
• switching it off via standby mode.
Important note: Firmware updates for trainers compatible with the Gateway (Justo, Justo 2, and Avanti) can only be performed via Wi‑Fi. It is not possible to update the firmware via Ethernet using the Gateway.