Follow

Trainer configuration with MyETraining and Not Elite app

The Elite trainers measure the speed in many different ways, concerning their structure.

 - The interactive Wheel-On trainers have a sensor which measures the elastogel roller spin rotations.
 - The Direct Drive trainers with the integrated electronic board could have the speed sensor in different places, so, there is a ratio coefficient to obtain the right speed value.
 - The trainers with the sensor Misuro B+ could be part of the first or the second group, concerning it is a Wheel-On or a DirectDrive.

The wheel circumference value configuration allows to compensate these trainer differences and allows to show the right speed data.
This setting could be inserted in the app MyETraining, in third-party app/software or in the cycle-computer.

The following table shows the circumferences values concerning the trainer model and the app/software:

 

  MY E-TRAINING NON-ELITE APPS AND DEVICES
    Connection as a controllable trainer (fe-c)
Connection as a speed & cadence sensor
Interactive Trainers      
Real Turbo Muin B+ wheel circumference if required, wheel circumference wheel circumference / 8.8
Drivo wheel circumference if required, wheel circumference wheel circumference / 3.43
Direto wheel circumference if required, wheel circumference wheel circumference / 12.1
Rampa default not required roller circumference (62mm)
Qubo digital Smart B+ default not required roller circumference (47mm)
RealAxiom B+ default not required roller circumference (62mm)
RealTour B+ default not required roller circumference (47mm)
Real Emotion B+ default not required drum circumference / 4 (67mm)
Arion Digital Smart B+ default not required drum circumference / 4 (67mm)
Smart Trainers      
Power Mag Smart B+ default X roller circumference (94mm)
Kura wheel circumference X wheel circumference / 3.43
Turno wheel circumference X wheel circumference / 15.34
Turbo Muin with SN < 30000 (thru-axle included) wheel circumference X wheel circumference
Turbo Muin with SN > 30000 wheel circumference X wheel circumference / 13.2
Turbo Muin thru-axle with SN > A30000 wheel circumference X wheel circumference / 17.6
Non-interactive/Smart trainers + Misuro B+      
30mm diameter roller
default X roller circumference (94mm)
45mm diameter roller
default X roller circumference (141mm)
Rollers default X drum circumference (264mm)
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk