JUSTO, JUSTO 2 and AVANTI interactive trainers feature the Fast Track function to send data from the home trainer to the software at a frequency that's higher than what's been done so far - that is, 10 Hz.
So far, the max transmission speed was 1 Hz. This new function makes it much faster for the home trainer to send data via Bluetooth and via TCP/IP protocol through the use of Gateway.
This function, as the frequency is higher than usual, is very useful when data needs to be particularly accurate.
For instance, it is best used during online or virtual competitions, when seeing data with a 10Hz definition makes every single pedaling stroke count.
This will make it possible to receive accurate data and record every single power, speed, and cadence variation with unprecedented accuracy.
Packet losses from radio transmission are minimized as you can record every single piece of data that a home trainer like Justo and Avanti can measure.
Activating the “Fast Track (10 Hz data)” function
A function can be activated by the My E-Training app via the Fast Track (10 Hz data)” function.
Configure the home trainer via the standard procedure Elite home trainer configuration with My E-Training
Tap on "Settings"
Tap on the "Home Trainer" page
Tap on the cog symbol on "Fast Track ( 10 Hz data )”
Once the “Fast Track ( 10 Hz data )” screen shows up
select "Enable"
A pop-up with "" will appear to confirm the procedure was successful.
When the function is active on My E-Training it will also be automatically enabled on third-party apps or software.
The latest firmware version is required to access this function. Using this simple procedure you can check whether your trainer is updated to the latest release or, if necessary, proceed with the update: Upgrado